Xiaomi Mi 5s Flash File Download Flashing Tools

Xiaomi Mi 5s Flash File,flash tool,firmware and all the drivers available here that you can
download directly via Google Drive,Xiaomi flash file download.

Xiaomi Mi 5s Flash File
How to flash Xiaomi Mi 5s Flash File

1.First download and then click Extract Xiaomi Mi 5s Flash File

2.Install the usb driver (skip if drivers are already installed)

3.Now be sure to install the driver.

4.Now flash tool to be opened.And to select the Firmware.

5.Find usb cable in your phone

This post was altered by mitch002 at 12:56, Jan-21-2017


by mitch002

Have you at any point been considering how to streak your Mi5 from China Stable to Global Stable Rom? There are essentially two strategy. Bolted Bootloader and Unlocked bootloader. Lets continue:

Things to do before continuing to either strategy:

Make sure to Enable USB Debugging:

– Go to About phone > tap MIUI form no less than 7 times to enact the Developer choices. Go to Additional settings > Developer option > USB dubbing > Enable it.

Before continuing: Disable Driver Signature Enforcement in Windows 7/8/10 64-Bit

USB Data link from your set.

Battery is charged less than half.


To start with things to begin with, each Mi5 accompanies a bolted bootloader, you should open its bootloader in the first place, utilize this guide of mine to open the bootloader:

[MIUI DEVICE TEAM] How to Unlock Bootloader of Mi 5s because

http://en.miui.com/string 267361-1-1.html

(Source: Xiaomi MIUI Official Forum)

When your bootloader is opened, you will require these drivers:


Qualcomm Driver

Mi Flash Tool

Insignificant ADB and Fastboot

Fastboot ROM Xiaomi Mi 5s Flash File

Establishment of Proper Drivers and Mi Flash Tool:

Download all the Zip documents and unfastened as needs be, introduce “minimal_adb_fastboot_v1.4_setup.exe” and “MiFlashSetup-Beta.msi”

Qualcomm HS-USB QDLoader 9008:

To begin with, double tap on the “Negligible ADB and Fastboot” desktop easy route, and sort the accompanying:seems like.

adb adaptation

adb gadgets another less

After successfull establishment, because the Device Manager should demonstrate USB Devices: ADB Interface

Right tap on the ADB Device and Update driver utilizing the downloaded due to Qualcomm Drivers.

Put your Mi5 to Fastboot mode by holding power and vol down together and you will see fastboot symbol show up.as a result

first of all Associate your telephone to the USB on your PC, therefore ideally the one at the back of the PC so its direct to the motherboard.

you will see your phone identified Xiaomi Mi 5s Flash File

Load, Mi Flash Beta and select the separated organizer which another resembles this (ensure there are no spaces in the middle of the filename of the envelope else it will cause a few mistakes) D:\gemini_global_images_6.5.30_20160516.0000.22_6.0_global

Select Clean All at the base right

At that point Click FLASH to continue

Reboot and make the most of your Global Rom.


Important Notes :

Take a backup of your parsonal data before flash.
Download Firmware

Leave a Reply

Your email address will not be published. Required fields are marked *